All Steel Access Floor Panels

All Steel Access Floor 1000

what is all steel access floor panels?  

     All Steel Access Floor panels are epoxy coated unitized shells consisting of a flat steel top sheet welded to a formed steel bottom sheet. Manufactured by changzhou huiya decoration materials co., ltd and this panel is exacting tolerances, these non-combustible rigid, solid panels deliver the ultimate in strength and durability with the convenience of lightweight construction.

All Steel Access Floor 1000.jpg

All steel access floor system characteristics

  Panel weight : 20.86 Kg/m2 bare.

  All steel welded construction.

  Protected from corrosion by an epoxy paint finish.

  Class A flame spread rating.

  Non-combustible material.

  System Performance Criteria

  Standards to CISCA Testing Methods

All steel access floor  System Performance Criteria 

All steel access floor system type System Weight (kg/m2) Static Loads Rolling Loads Impact Loads
Panel Understructure Design Loads1 Minimum
Ultimate Loads
Safety Factor
(min 2.0)2
10 Passes 10,000 Passes
All Steel 1000 Posilock 27.01 Kg/m2 453.6Kg 907.2Kg PASS 181.44Kg 181.44Kg 45.36Kg
Bolted Stringer 6.0 lbs/ft2 453.6Kg 907.2Kg PASS 181.44Kg 181.44Kg 45.36Kg

*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load

  1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.

  2. Safety Factor is Ultimate Load divided by Design Load.