Laminate Access Floor Panels

Laminate HPL access floor 2000

What is Laminate HPL access floor 2000?

  Laminate HPL access floor 2000 is a all steel access floor. As we know,HPL finishes on the top are ideally suited to data centre applications, it is excellent ability to dissipate static electricity to the ground. HPL is created by multiple layers of kraft paper, treated with a resin to offer excellent impact and dent resistance properties.Laminate HPL access floor 2000 panel is intended for commercial applications with a light total load requirement and is engineered to meet  Standards per CISCA testing methods.

Laminate HPL access floor 2000.jpg

 Key Performance Characteristics

  Panel weight : 10.25 lbs/ft² bare.

  All steel welded construction filled internally with a cementitious core material.

  Protected from corrosion by an epoxy paint finish.

  Class A flame spread rating.

  Non-combustible material.

  System Performance

  Tate Standards to CISCA Testing Methods

  System Performance Criteria (Tested on Actual Understructure*)

System TypeSystem Weight (lbs/ft2)Static LoadsRolling LoadsImpact Loads
PanelUnderstructureDesign Loads1Minimum
Ultimate Loads
Safety Factor
(min 2.0)2
10 Passes10,000 Passes
ConCore®2000Bolted Stringer11.5 lbs/ft22000 lbs4000 lbsPASS1500 lbs1250 lbs200 lbs

*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load

1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.
2. Safety Factor is Ultimate Load divided by Design Load.