Laminate Access Floor Panels

Laminate HPL Access Floor 1250

Whate is Laminate HPL Access Floor 1250?

    Laminate HPL Access Floor 1250  is used in coumputer rooms and data center, it is  A class floor grade laminate which dissipates static and provides an easy to clean and maintain walking surface。 it has the  intended for commercial applications with a light total load requirement and is engineered to meet Tate Standards per CISCA testing methods. we provide access floor with black pvc trim edge or none black pvc trim edge and the concentrate load can be reached at 1250 lbs.

Laminate HPL Access Floor 1250.jpg

About Changzhou Huiya Decoration Materials Co.,Ltd

changzhou huiya decoration materials co.,ltd is an access floor(raised floor) manufacturer in china, it is also the group member of CNSME. we corprarte with the cnsme and provide anti-static acces floor with high pressure laminate(HPL) with differernt colour. customer can buy access floor as thier customized requirements.  

Access Floor Key Performance Characteristics:

  Panel weight : 8 lbs/ft² bare.

  All steel welded construction filled internally with a cementitious core material.

  Protected from corrosion by an epoxy paint finish.

  Class A flame spread rating.

  Non-combustible material.

  System Performance

  Tate Standards to CISCA Testing Methods

  System Performance Criteria (Tested on Actual Understructure*)

System TypeSystem Weight (lbs/ft2)Static LoadsRolling LoadsImpact Loads
PanelUnderstructureDesign Loads1Minimum
Ultimate Loads
Safety Factor
(min 2.0)2
10 Passes10,000 Passes

Laminate HPL 


Floor 1250

Posilock8.5 lbs/ft21250 lbs2500 lbsPASS1125 lbs875 lbs150 lbs
Bolted Stringer10.0 lbs/ft21250 lbs2500 lbsPASS1000 lbs800 lbs150 lbs

*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load

  1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.

  2. Safety Factor is Ultimate Load divided by Design Load.